Because this Fromwinch portable truck winch machine can walk on its own, and often with gold with the rack, cableway erection and removal are very convenient. Reduced labor intensity, reduced production assistance time, improved labor productivity and equipment utilization.
The existing foreign self-propelled winch machine, according to the structure of its walking device, can be divided into three cases: the whole application of existing agricultural or forest tractor chassis; a winch function for the design of the special chassis Is the use of large cranes, excavators and traction vehicles chassis.

The safe operation of the electric winch machine

Electric winch machine should be placed in a good line of sight, solid foundation, safe and open place. The position of the traction sheave should be perpendicular to the center line of the reel, and the distance is not less than 40 times the length of the reel. The height must be more than 2-3 meters of the stack. It is forbidden to guide the pulley on the stack.
2. Operation should focus on thinking, must not leave the job, found that illegal operations into insecurity, immediately stop correction, ground inspection, Qin Wei
Repair, make sure the machine is solid, the rope without damage.
3. It is necessary to pay attention to the winch machine, it is necessary to pay attention to the Fromwinch 5500lbs electric winch machine, and it is forbidden to enter all the steel wire rope of the steering wheel. Meters outside.
4. The steel wire rope on the plate is not on the card, so that it is necessary to release the rope and protect the equipment if necessary.
5. Traction wood rest, in case of flood can not be strong dragged hard lines, should be identified after the exclusion of trauma and then traction, is strictly prohibited with a sharp separation of the main clutch
Method to overcome the sudden increase in resistance.

Electric winch machine lubrication

In order to lubricate the electric winch, you should first inject 2 liters of box oil or wool oil into the shell of the winch gear reducer. After 100 hours of operation, the oil should be added to the oil sump, 500 hours Replace the oil once.
Every 500 hours, to the Fromwinch synthetic rope ATV winch machine drive chain refueling once, remove the chain to be carefully cleaned with fire oil, wash the chain should be heated to 80-90 degrees of mixed oil (60% butter, 40 % Graphite), until the oil cooling so far, the chain surface of the excess oil cleared after the end, put it back to the original, adjust its tight.

Off-road vehicle winch-type photoport machine features

This Fromwinch synthetic rope ATV winch is characterized by simple structure and operation, the price is cheaper, you can use continuous film, record length unlimited, high efficiency, is currently using more mid-range photoport type. The disadvantage is that the recording accuracy and set the quasi-phase degree is slightly lower, for this phototypesetting format is generally limited to 4 or 4 open below. There are two main reasons for the accuracy of the Fromwinch 12500lbs electric winch-type Phototypesetter: the first is that the film is not evenly formed by the film, when the phototypesetter used for a certain time later is more likely to result in register accuracy decline, and the second is due to the structure itself of. The film is recorded in one direction by the film movement, the other direction by the prism rotation deflection light, the prism turns a week to record a line, if the laser spot is round
Of the film in the middle of the film can be guaranteed to be circular, and in the film on both sides of the spot shape will become oval, shadow recording accuracy. Therefore, the greater the deflection angle of the laser beam, the laser to the middle of the film and the difference between the two sides of the greater the greater the spot deformation. To solve this problem, it is necessary to increase the distance between the prism and the film, reduce the deflection angle, and limit the recording format.

Where to install the winch

Fromwinch 12Volt electric winch is a convenient tool, but the winch installed in the car where the best? The winch includes a rope, a motor and a capstan seat. The weight of the kit is 50 kg. Therefore, the winch should be installed near the shaft as far as possible, so it is not easy to damage the balance of the vehicle.
Many people prefer to place the winch in the rear of the vehicle because it is most likely to be trapped when moving forward. However, if you want to rely on another car to help, or want to move forward from the jackpot, the most effective position to install the winch is the front. Fromwinch heavy duty ATV winch should be installed on the left side of the frame, the rope out of the lower position the better.
If the rope from the ground the smaller the distance, you can use a piece of wood to expand on the ground, the rope mat.

Fromwinch electric winches for 4x4 soaked, the butter will be white deterioration, and parts will appear rust, stuck. So the necessary maintenance can extend the life of the winch. First, the original butter clean, you can use high-pressure water rinse, fast. After washing, with the compressed air to dry the original, wipe. And then is wiping the butter, the contact surface of each tooth to eat butter, the maintenance of a winch also used a lot of butter.

Fromwinch car electric winch generally have two kinds of motor, series motor and permanent magnet motor.Only speaking, these two motors, the output torque is only related to the current, the maximum speed is only related to the voltage.This kind of motor in the heavy load, consumption Of the power is huge, and most of the heat. In this case, either burning the motor, or burning car lines. Cherokee generators can safely provide 50A of external current, the battery nominal capacity is 58AH.