Car winches with the specific steps of the drag:

1, first check the fromwinch electric winches for trucks drum wheel. Before starting the car winch, make sure that the car winch is neatly wound around the car winch drum.
2, if the car winch rope out, should prevent the car wandering back and forth. If the car winches are broken, the winches of the motor winch can be very dangerous. However, this danger can be avoided, as long as the tension in the car winches on a mat placed on the line.
3, start using the car winch drag, if the car winch cable pull their own car, and you have to drive in the car winch car, it is best to have a car in the car to help you winch. In this way, the vehicle winch car driver can be in accordance with the command of the car outside the command, in the car manipulation of the car winch.
4, if the fromwinch electric clutch winch twisted cable together, we must pull the car winch. An automobile winch cord is easily crossed or worn on one side when wound around an automobile winch drum. Therefore, pay close attention to the status of car winch.
5, when the car winch car free to walk, the use of car winch drag to complete. Once back on the floor, check the car wagon for vehicle and line conditions. If you can not rely on external driving car winch car, the use of car winch drag the process is over.
6, the car winch cable is good. Tauten the car winch rope, carefully sent back. If the car winch cord cross on the car winch drum or twisted, first completely untied, and then re-roll.
7, and finally put the car winch hook. When the end of the car winch only the last point, the car winch hook tied to the side of the car winch. And then the rest of the car winch rope rolled up, the fromwinch electric winch for tower hook to suppress.