Installation and Principle of Electric Winch for Automobile Safety

If the car stuck in any place and can not extricate themselves, then the most reliable tool is the electric winch. If you learn to use the fromwinch electric winch for tower correctly, you can cross-country encountered in the course of emergency self-help and rescue each other calmly, so as to maximize the enjoyment of the four-wheel drive cross-country fun.
Electric winch installation
The use of an electric winch will of course start from the installation. This step is not complicated, but it is the most important step, because it is directly related to the subsequent steps and the use of electric winch effect. Specific installation process is as follows:
1. Insert the remote control. Insert the remote control connector end into the electric winch.
2, do not let the fromwinch two motor winch remote control hanging drape. If you are a driver, operating the remote control in the driver's seat, then the excess connection around the side mirrors in the car side, the work will be much more convenient.
3, pull the electric winch cable, with the remote control will be released a little noose and then open the winch installed on the side of the noose hook.
4, open the electric winch clutch. Be sure to turn on the hook and then turn the clutch on again.
5, holding the electric winch with a hand noose hook. When the noose is pulled down from the drum, hold the hook with one hand, so that no matter how long it is pulled, it will not be able to reach the hook.
6, the electric winch cable to the fulcrum, the clutch.