Electric winch machine lubrication

In order to lubricate the electric winch, you should first inject 2 liters of box oil or wool oil into the shell of the winch gear reducer. After 100 hours of operation, the oil should be added to the oil sump, 500 hours Replace the oil once.
Every 500 hours, to the Fromwinch synthetic rope ATV winch machine drive chain refueling once, remove the chain to be carefully cleaned with fire oil, wash the chain should be heated to 80-90 degrees of mixed oil (60% butter, 40 % Graphite), until the oil cooling so far, the chain surface of the excess oil cleared after the end, put it back to the original, adjust its tight.

Off-road vehicle winch-type photoport machine features

This Fromwinch synthetic rope ATV winch is characterized by simple structure and operation, the price is cheaper, you can use continuous film, record length unlimited, high efficiency, is currently using more mid-range photoport type. The disadvantage is that the recording accuracy and set the quasi-phase degree is slightly lower, for this phototypesetting format is generally limited to 4 or 4 open below. There are two main reasons for the accuracy of the Fromwinch 12500lbs electric winch-type Phototypesetter: the first is that the film is not evenly formed by the film, when the phototypesetter used for a certain time later is more likely to result in register accuracy decline, and the second is due to the structure itself of. The film is recorded in one direction by the film movement, the other direction by the prism rotation deflection light, the prism turns a week to record a line, if the laser spot is round
Of the film in the middle of the film can be guaranteed to be circular, and in the film on both sides of the spot shape will become oval, shadow recording accuracy. Therefore, the greater the deflection angle of the laser beam, the laser to the middle of the film and the difference between the two sides of the greater the greater the spot deformation. To solve this problem, it is necessary to increase the distance between the prism and the film, reduce the deflection angle, and limit the recording format.

Where to install the winch

Fromwinch 12Volt electric winch is a convenient tool, but the winch installed in the car where the best? The winch includes a rope, a motor and a capstan seat. The weight of the kit is 50 kg. Therefore, the winch should be installed near the shaft as far as possible, so it is not easy to damage the balance of the vehicle.
Many people prefer to place the winch in the rear of the vehicle because it is most likely to be trapped when moving forward. However, if you want to rely on another car to help, or want to move forward from the jackpot, the most effective position to install the winch is the front. Fromwinch heavy duty ATV winch should be installed on the left side of the frame, the rope out of the lower position the better.
If the rope from the ground the smaller the distance, you can use a piece of wood to expand on the ground, the rope mat.

Fromwinch electric winches for 4x4 soaked, the butter will be white deterioration, and parts will appear rust, stuck. So the necessary maintenance can extend the life of the winch. First, the original butter clean, you can use high-pressure water rinse, fast. After washing, with the compressed air to dry the original, wipe. And then is wiping the butter, the contact surface of each tooth to eat butter, the maintenance of a winch also used a lot of butter.

Fromwinch car electric winch generally have two kinds of motor, series motor and permanent magnet motor.Only speaking, these two motors, the output torque is only related to the current, the maximum speed is only related to the voltage.This kind of motor in the heavy load, consumption Of the power is huge, and most of the heat. In this case, either burning the motor, or burning car lines. Cherokee generators can safely provide 50A of external current, the battery nominal capacity is 58AH.

Vehicle hydraulic winch selection:

Rated pulling force
Winch to buy according to the car's own weight and their hobbies. The weight of the car with the winch is equipped with the relationship is: the maximum winch when the tension is greater than twice the weight of the car to more than one and a half reliable, as their hobby and winch relationship, such as playing muddy road you like to play sand play sand, which The choice of the winch is a big difference, then 1.5 times the weight of the car is not enough, which requires a lot higher than the winch pull.
Line speed
Many people may ask Fromwinch electric truck winch recycling rate really so important? The answer is yes. Speed ​​is very important, because if the car into the swamp, the use of winch pull fast, it can help the front wheel out of the pit, followed by the rear wheel will follow from the pit. If the capstan speed is slow, the front wheel will spin rotation will continue to cut the pit, pushing the former, the opportunity to reduce the pit out, the winch work load becomes larger and very hard. Most winches have fast wire-speed in no-load conditions, and the wire speed drops dramatically with increasing load, typically in the range of two feet to five feet per minute. High-speed winch use more powerful motor, battery consumption faster; "high-speed" is mainly reflected in the no-load or low load, heavy load when the speed advantage is no longer obvious.
rope
There are now two types of ropes commonly used in winch: steel wire rope and nylon rope. Early use of wire rope, compared to nylon rope, more resistant to wear and heat, but also relatively cheap, of course, the weight will be significantly worse than the nylon rope. Nylon rope light weight, toughness, in the case of rope breakage, but also to continue to use after the death knot.
Accessories
The winch attachment ensures safe and easy operation during Fromwinch electrical cable winch operation. Such as roller-type rope guide, in the safe operation of the winch wireless remote control, hold tree belt, U-shaped shackle, horn, moving pulley, leather gloves. Maybe you also need a ground anchor.

Fromwinch 9600lb electric winches motor and gearbox is usually not sealed (mainly to facilitate heat, does not rule out the original design does not need to seal and other factors), so that the use of a longer period of time without maintenance winch its motor And gears have erosion phenomenon.
At present, the vast majority of winch has not yet used solid-state relays, winch control circuit directly exposed to the plastic box is not sealed, but also the equivalent of exposure to the sun, while the winch in normal use , Splashing or even flooding are inevitable, for a long time is caused by oxidation of the circuit board and wiring corrosion.
However, from her experience with tens of thousands of winch experience, there is no splashing or flooding on the failure of a typical case, from this point of view, it can be said to require how the waterproof winch may not be very important .
Of course, there is a good technology why not enjoy it? Therefore, a good Fromwinch 12500lbs electric winch host material and process accuracy may reduce motor and gear corrosion, while the use of solid-state relays can improve the electric performance of the winch, and save money.