Wrecker electric winch in use, the hydraulic winch wrecker sometimes there will be some failures, common hydraulic winch wrecker phenomenon:

1, electric winch or motor oil leakage
Mainly hydraulic electric winch wrecker long-term use, electric winch seal damaged or loose bolts, as long as the replacement of electric winch seals and electric winch to tighten the connection bolts can be.
2, electric winch clutch separation, joint poor
Hydraulic electric winches wrecker clutch claw dislocation or clutch operating mechanism in question, hydraulic electric winch rotating drum to align the paw and check and remove the operating mechanism failure can be.
3,fromwinch Winch Cable Dampener work, the pressure instability and trembling
Mainly the electric winch load instability and electric winch rope rope chaos caused by re-electric winch row of steel wire rope can be (in the electric winch hook to increase the weight to avoid no-load rope).
Wrecker electric winch to regular maintenance, in order to protect the safe use of electric winch and extend the life of electric winch. To regularly replace the electric winch box of oil, generally replaced once a year.
Always check the electric winch, the motor whether there is leakage. Always check the electric winch installation bolts are loose, we must always check the electric winch wire rope broken, wear, deformation, and regular use of lubricants on electric winch wire rope lubrication, to scrap the conditions of electric winch wire rope, be sure to replace the new electric Winch wire rope.
In general, to strictly follow the specification requirements to use, maintenance and maintenance of fromwinch 12500lbs electric winch, in order to make good use of electric winch and wrecker.

Hydraulic electric winch wrecker

Hydraulic electric winch has been widely used in the wrecker, hydraulic electric winch is an important functional components, fromwinch two motor winch winches are often used for lifting and towing traction operation, hydraulic electric winch from light to heavy there are many specifications , Commonly used hydraulic electric winch with hydraulic worm winch hydraulic winch and planetary gear reducer hydraulic fromwinch electric clutch winch two types of structure, electric winch driven by hydraulic motors, electric winch deceleration device to achieve speed and increase the output torque of the purpose, in order to achieve electric Relative capacity of the winch.
Electric winch Worm hydraulic electric winch structure is relatively simple, easy to manufacture electric winch, electric winch drive efficiency and production costs are relatively low, electric winch is generally used in light fromwinch atv winch with remote control....

Car winches with the specific steps of the drag:

1, first check the fromwinch electric winches for trucks drum wheel. Before starting the car winch, make sure that the car winch is neatly wound around the car winch drum.
2, if the car winch rope out, should prevent the car wandering back and forth. If the car winches are broken, the winches of the motor winch can be very dangerous. However, this danger can be avoided, as long as the tension in the car winches on a mat placed on the line.
3, start using the car winch drag, if the car winch cable pull their own car, and you have to drive in the car winch car, it is best to have a car in the car to help you winch. In this way, the vehicle winch car driver can be in accordance with the command of the car outside the command, in the car manipulation of the car winch.
4, if the fromwinch electric clutch winch twisted cable together, we must pull the car winch. An automobile winch cord is easily crossed or worn on one side when wound around an automobile winch drum. Therefore, pay close attention to the status of car winch.
5, when the car winch car free to walk, the use of car winch drag to complete. Once back on the floor, check the car wagon for vehicle and line conditions. If you can not rely on external driving car winch car, the use of car winch drag the process is over.
6, the car winch cable is good. Tauten the car winch rope, carefully sent back. If the car winch cord cross on the car winch drum or twisted, first completely untied, and then re-roll.
7, and finally put the car winch hook. When the end of the car winch only the last point, the car winch hook tied to the side of the car winch. And then the rest of the car winch rope rolled up, the fromwinch electric winch for tower hook to suppress.

Install the car winch The specific installation process is as follows:

1, insert the fromwinch 4500lbs electrical winch remote control. Insert the car winch remote control connector end into the car winch.
2, do not let the car winch remote control hanging drape. If you are a car winch car driver, in the car winch car driver's seat on the car winch remote control, then the excess car winch connection around the car winch car side mirrors, so that the installation of the car winch will work together will be convenient many.
3, pull the car winch rope, with the car winch remote control will be a little winch cable car and then open the cable installed in the car winch side of the noose hook.
4, open the fromwinch electric truck winch clutch. Note that you must open the car winch hook and then open the car winch clutch.
5, hand holding the car winch rope hook. When the car winch rope is pulled down from the drum, hold the car winch hook with one hand, so that no matter how long the car winch cable pulls, it will not be able to reach the car winch hook.
6, the car winch cable to pull the car winch fulcrum, lock the car winch clutch.
At this point the fromwinch 12500lbs electric winch is ready.

Self - help device for off - road vehicle winch

Off-road vehicles due to poor driving conditions, often equipped with off-road vehicle winch as a self-help device. When the car wheel into a particularly loose to save the soil, or in the ice on the road surface can not travel, and fall into the pit of the hinge, you can use their twist to the end of the rope fixed in a nearby reliable location. 2. The fromwinch electric wireline winch rope twisted by the engine lifted the car out of the woods. See also You can also use it to rescue other troubled vehicles. General car winch mainly by force box, drive shaft, winch, reducer, drum Jane and automatic brakes and accessories and other components.

In fact, the winch this thing is called the hoist in the industry, because your car into a quagmire bunker or a steep slope can not move when this time we must rely on the fromwinch heavy duty synthetic rope winch, the winch can make your car from 4X4 into 4X5, ha ha, Therefore, others generally referred to as the fifth drive winch, electric winch has been the main form of off-road vehicles with the winch. Winch model means that the winch traction, the principle of choosing the winch is generally 1.5 times the weight of the vehicle weight is appropriate, as well as winch models will be marked the traction of the fromwinch high speed electric winch.

Car winches with the specific steps of the drag:

1, first check the fromwinch electric towing winch drum wheel. Before starting the car winch, make sure that the car winch is neatly wound around the car winch drum.
2, if the car winch rope out, should prevent the car wandering back and forth. If the car winches are broken, the winches of the motor winch can be very dangerous. However, this danger can be avoided, as long as the tension in the car winches on a mat placed on the line.
3, start using the car winch drag, if the car winch cable pull their own car, and you have to drive in the car winch car, it is best to have a car in the car to help you fromwinch electric crane winch. In this way, the vehicle winch car driver can be in accordance with the command of the car outside the command, in the car manipulation of the car winch.
4, if the car winch twisted cable together, we must pull the car winch. An automobile winch cord is easily crossed or worn on one side when wound around an automobile winch drum. Therefore, pay close attention to the status of car winch.
5, when the car winch car free to walk, the use of car winch drag to complete. Once back on the floor, check the car wagon for vehicle and line conditions. If you can not rely on external driving car winch car, the use of car winch drag the process is over.
6, the car winch cable is good. Tauten the car winch rope, carefully sent back. If the car winch cord cross on the car winch drum or twisted, first completely untied, and then re-roll.
7, and finally put the fromwinch electric winches for trucks hook. When the end of the car winch only the last point, the car winch hook tied to the side of the car winch. And then the rest of the car winch rope rolled up, the car winch hook to suppress.

Winch, off-road essential goods one

Off-road vehicles in addition to lifting the suspension system, coupled with non-slip differential to improve off-road capability, the winch (fromwinch electric wireline winch) is also very important one of the accessories. In the West, the Army had at least one winches per 10 four-wheel-drive trucks, which did not include the Engineering Recycling Vehicle (which was a chassis made up of 6x6, 8x8 heavy-duty trucks or more than 50 tonnes of tanks It is a large car with 2-4 winches, specifically to rescue in the field into a deep pit truck-style tanks). fromwinch high speed electric winch the importance of this can be seen.